LE220
Footswitch with parallel interface connection
The wide-designed footswitch is ideally suitable for radio and control centers. The parallel interface interconnects several footswitches and allows a simultaneous operation at one communication station. The parallel connection enhances fl exibility and comfort especially in bigger control centers. The footswitch is made of a lightweight, stable steel housing with aluminum profile.With the slip resistant coating at the bottom of the switch, the footswitch has, despite its low weight of 1.2kg, an excellent grip.
The send switch is directly placed below the foot rail and can be easily depressed by exerting a slight pressure on the rail. When the rail is depressed, two single-pole contacts are activated and the transmitter is keyed. It can be activated from any position at the rail.
You can get the foot switch with a 2 m long 3-conductor cable. The grounding of the connection cable maximizes its security. Furthermore, the device is protected against particle intrusions (IP code 40).
Technical data
Depth | 95mm |
Width | 760mm (200mm to 3m possible) |
Height | 25mm |
25mm | 1.2kg |
Switch | normally open contact |
Operating temperature range | -5°C to +40°C |
Housing | switch housing sheet steel, under aluminum profile |
Tread | black rubber |
Protective cover | available up to 300mm length |
Color selection | rubber black |
Number of poles | 2 x N/O single pole footswitches |
Contacts | silver (gold on request) |
Connection cable | 3-conductor PVC with grounding conductor |
Length connection cable | 2m (others on request) |
Cable feed | rear right |
Capacity load | 6A resistive 250V 3A inductive ½ HP |
IP Code | IP40 |
European Norms | EN 61058, EN 61058-2-1, EN 60529 IPX2 |
EU Directives | 2014/35/EU |